Відео

I wouldn't say the cut is even but that isn't important. Reel mowers are awesome and nice video. Thanks

Not sure I'd go to all that work and not change the cable for a few $

looks like a job for some tanerite oh wait, evey job looks like a job for some tanerite 😆

Don’t bother, he doesn’t actually show taking it out or putting it in.

Drill it. Tap it. Done.

Thank you for posting this very informative video. I have a 1990 Dodge Dynasty with this same 3.0 engine. I was unsure where the PVC valve was located and what type and size of socket I need to remove it. This video is gold.

This was great!

Great job. All these other kids talk about everything else on their videos besides the job. This is a great vid alot of idiots can learn from you.

Where does that spring connect to on the deck .. I know where it goes on the rear of the frame but what does it hook to on the deck ..?

Going to try that ASAP because I don't want to take mines apart and your way was super easy., Thanks bro!

شكرا 🫶🏻

I greatly appreciate this video. I ignored my TPMS light, assuming the sensor battery had died. For a while, I could hear a clanking from my left rear wheel. I checked if all the lug nuts were tight and the bolts on my wheel assembly were tight. I couldn't determine the cause of the clanking noise. My tire shop just determined the exact same issue that you outlined in your video. Thanks for explaining!

Had the exact same issue with my 2012 Legacy...and with the same lousy heat shield! Yes, removing the air duct is key (unless of course you're working from underneath the car). Only thing I did differently was I oriented the clamp in the opposite direction so I could get a nut driver straight onto the clamp from above and tighten the p*ss out of it (it might have made getting it started a little more difficult but I think it was worth it). One word of caution to anyone else watching: There is an O2 sensor a little further back from this spot so be VERY CAREFUL not to get the sensor's cable stuck inside the clamp. It would be bad.

I hate to be that guy. Take off that fricken ring. Yes I know you disconnected the battery but it will get you eventually.

Great diagram! I just helped my boyfriend figure it all out from your video. Thank you so much

good job!

Tysm!!! ❤🎉

Someone pointed out aftermarket starters for this particular engine have 9 teeth gears compared to 10 teeth gear on OEM Denso starter. ua-cam.com/video/yUbkrMobF6U/v-deo.html

Is this the same with the grand am 2.2?

8 years later I just learned how to change my belt and successfully did it today because of you hats off to this video

It's still not clear to me what surface the blades are sharpening against. What is needed other than the crank tool?

Brilliant

Great video brotha!!

i had same burning smell in my ford freestyle and and now it wont start please help

i have a asc-2680 and i crashed it pretty bad recently i broke some plastic under one of the propellers i tried fixing it with crazy glue with no avail u can hear the gear slipping with a pretty loud squeal im probly just gonna get another 2680 and keep this one for parts i dont know what else to do

My shifted works but my low and high left handle dsnt go to high it’s stuck in low how do I fix that the same way ?

Thanks! my 11yo has lost another excuse to stay inside.

What is the bicycle looking sprocket for?

The bolt right behind the dipstick, next to where the dipstick is bolted into is the bolt I'm missing. Does anyone know what bolt that is, like what size? For reference I have an 05 wrx 2.0L Turbo EJ205

I went to put my vacuum head back on my kirby after shampooing. When I tried to put the belt back on it didn't work. I tried to turn it to release the belt, but it is too tight to go all the way to the red arrow. What am I doing wrong?

This video was an AWESOME find. I bought the saucer at a garage sale and forgot to take pictures of the seat before I took it apart. THANK YOU!!!

Thankyou so much . My cord just broke. I Appreciate the help.

Thanks for posting this video which was very helpful for me. My problem was not as complex as yours (lower limbs which were smaller) and the snow rake pole with the hook did the trick very easily.

Thanks Billy Bob thorton

Just repaired my Kenmore model 110 from 1992 THAT STILL WORKS. Second set of agitator dogs ive put in. I won't buy a new washer because they dont have traditional agitators anymore. Kenmore products last forever. How Sears and Kmart went out of business had to be bad business management.

I was thinking to pay to rebuild my sunken stairs!!!, THANKS A LOT!!!

Wonderful ❤️

FINALLY A VIDEO TO FIX THE GEARS THAT HAVE THE SAME AS ME!

I was told by a Honda mechanic that the CR-V's uses the ATF for lubrication. I asked about my 2009 AWD CR-V.

My kinda repair 👍💯

The one I have is electric so now I’m not sure… Chateau D Ax

Everyone else timing mark on harmonic balancer is obviously mines either don’t have one or got scrubbed off

Whats the name and part number for the feed line . That really long one. Thank you.

Pregunta se tiene q sacar el oil

Which motor do I need to buy? Any specs (aside from rotational direction)?

Thank you Your video was very very helpful.

I need you to fix my timing on my cavalier .

Just got that radio, now I’m gonna attempt it. Good stuff!

I just installed this. Is it possible to readjust the guidelines on the backup camera? And how's the mic with you guys? When I'm calling I sound like I'm meter away.

Vidéo helped me sooo much. Grinder is 30 years plus. Belonged to my dad. Thought I was missing a piece. Manual no help, not specified. Thank you❤